Products
Under what conditions is the silicone dust removal framework used?
Origin：Hefan Hit： Time：2020-01-21
Both the plastic spray frame and the silicone frame can be used in an environment with acid and alkali corrosion, and the two frames cannot be discerned only by looking at the surface, but there are significant differences between the two!
The temperature of the plastic spraying frame is below 200 degrees, while the temperature of the silicone dust removing frame can reach 300 degrees. Some users did not grasp the temperature difference between the two types of dust removal skeletons when purchasing, because they did not grasp the application environment and spent unnecessary money.
Silicone dust-removing skeleton: The silicone dust-removing skeleton can be used in a working environment of about 280 ° C and the instantaneous application temperature can reach 300 ° C. The dust-removing skeleton is one of the components in the bag dust collector, which is used to support the dust bag to prevent collapse The distribution of dust increases the efficiency of dust removal. According to the requirements of the application environment, the dust removal skeleton can be divided into galvanized dust removal skeleton, plastic dust removal skeleton, and silicone dust removal skeleton to meet the requirements of different working conditions. It is used in chemical, metallurgy, In dust collectors for industries such as building materials, steel, cement, and thermal power generation, the quality and application effect of the dust removal framework directly affects the dust removal efficiency of bag dust collectors.
Plastic spraying dust removal skeleton: The plastic dust removal skeleton is after pickling and phosphating the welded dust removing skeleton, and then cleans the oil, rust, dust, etc., forming a uniform and rough layer on the outer surface of the dust removing skeleton. The rusty gray phosphating film can both prevent rust and increase the adhesion of the sprayed layer. The dust removal framework uses the corona discharge phenomenon to make the plastic powder adsorb on the surface of the workpiece to form a powder coating of a certain thickness. After baking at 180-220 ° C, the plastic powder is melted and adhered to the surface of the dust removal framework to form a protective layer to increase the skeleton. Temperature resistance and life span.
